manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 169 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 169

159

Setting Up Rooms

This section describes Kaleido-X rooms and their configuration.

Key Concepts

Room

A room is a visual grouping of displays that represent the physical displays positioned and sized as they are 
installed in an actual room. Multiple operators can share the same room. The grouping of display creates 
a large virtual monitor wall that operators see as a single large display. The room definition specifies 
display resolutions and sizes, as well as zones that are used to display full screen layouts.

Display versus Monitor

Within the XEdit workflow, a “display” refers to the representation of a physical monitor (such as a CRT) 
within a room, whereas a “monitor” refers to a composite widget. A video widget displaying a specific 
video signal on a display is called a “video window”.

Full Screen Zone

A full screen zone is a sub-section of a room. It can be any size and it can be positioned on any of the 
displays in the room. The full screen zone is an area of the monitor wall that is assigned to specific users. A 
full screen zone can be associated with one or more full screen layouts.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments