Miranda Kaleido-X (4RU), User Manual, Page: 80 / 388

70
Operation of the Monitor Wall
3
• Not a monitor wall destination: If the widget was not already configured as a monitor wall
destination, then the layout will be reloaded in its initial state, as it was configured in XEdit.
Using Timers
Timers can be assigned to timer widgets in a layout. Any user can control such timers by using the timer
widget’s buttons and shortcut menu. An RCP user can be assigned a specific timer. This allows using the
numeric keypad on an external keyboard connected to the RCP2 to control the timer.
Controlling a Timer by Using the Timer Widget’s Buttons and the Shortcut Menu
.
Notes
• Timer widgets display time in HH:MM:SS format. Even if the widget is synchronized with an LTC
source, frame count is not displayed.
Reset Timer mode End behavior Start/Stop
Stop
Remaining
Loop
Down
Overrun Up