manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 64 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 64

54

Operation of the Monitor Wall

3

After a brief delay, the dashboard appears at the bottom-right corner of the monitor, and the 
command Hide dashboard replaces Show dashboard on the menu.

Dashboard on the monitor wall

Hiding the Dashboard

To hide the dashboard:

•

Click the × button at the bottom-right corner of the dashboard. Alternatively, right-click anywhere on 
the monitor, point to Monitor Wall on the shortcut menu (if you clicked a widget), and then click Hide 
dashboard to hide the dashboard on the current head.

Note: 

Clicking the × button closes the dashboards on every monitor in the room if they were displayed 

automatically.

Hide dashboard

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments