manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 159 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 159

SNMP Agents

149

5. Click the Properties tab.

The calibration controls for the selected alarm appear.

6. Select the Trap enabled check box to have the Kaleido-X issue an SNMP trap each time this alarm is 

triggered.

7. Click Apply to all to apply this setting to 

all other alarms with the same name

, throughout the system.

In the example, clicking Apply to all will enable the Video Luma Too High trap on every input card in 
your system.

Note: 

This is particularly useful for audio input errors, because of the large number of channels arriving 

at the Kaleido-X.

8. Repeat the procedure until all desired SNMP traps have been enabled.

9. On the File menu, click Save. Alternatively, click the Save button on the toolbar.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments