Miranda Kaleido-X (4RU), User Manual, Page: 34 / 388

24
Getting Started
1
The Network Configuration page is displayed.
7. Change the ABT’s network settings, as necessary, then click Apply & Reboot.
Note: If you purchased more than one Audio Bridge Terminal unit, keep in mind that they all ship with the
same default static IP address. Make sure to assign each of them a different static IP address before
connecting them to the network, if DHCP is not used.
For more information, please refer to the Hardware Description & Installation Manual , available on the DVD
that shipped with your system.
Step 3 – Selecting a Default Layout
If your system was configured prior to shipment, then the designated layout will show up on all displays.
Otherwise, a gray screen will appear with the following message in the middle:
“No layout has been assigned to this room. Please load a layout.”
To select a default layout, do the following:
1. Connect a mouse to the RCP2.