Miranda Kaleido-X (4RU), User Manual, Page: 29 / 388

Step 2 – Networking Setup
19
The new settings are saved locally.
7. Click OK .
The Apply settings button becomes available.
8. Click Apply settings .
The Kaleido-X system must be restarted for changes to the network configuration to take effect. A
message appears prompting you to reboot the system immediately.
9. Click OK .
Note: Settings cannot be applied to the Kaleido-X while a card is being upgraded. If the Kaleido-X
frame does not reboot after 10 seconds or so, try clicking Apply Settings again after a minute or two,
until the frame reboots.
10. Remember to change your client PC’s IP address to one that matches the new Kaleido-X subnet. You
will also need to edit the XAdmin URL in your Web browser's address bar, in order to log on to the frame
again.
Configuring the Kaleido-RCP2
The Kaleido-RCP2 is a multi-function remote control panel designed for use with Miranda’s Kaleido-X.
Ethernet connectivity allows multiple RCP2 users to access multiple Kaleido-X systems, allowing