manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 212 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 212

202

Creating Layouts

9

Note: 

When a custom safe zone image is selected, the following attributes are not available: 

Marker color

, 

Safe title offsets

, 

Safe zone aspect ratio

, and 

Unsafe zone color

.

Video Cropping/Zooming

The display of a video signal can be cropped to remove unwanted portions. In XEdit, users can choose 
between underscan or overscan. Overscan settings can be customized.

To set the underscan/overscan properties of a video widget, do the following:

1. In XEdit, open a layout and click to select the video widget for which you wish to specify overscan/

underscan settings:

The 

Underscan/Overscan

 settings appear under the 

Properties

 tab.

2. Choose 

Underscan

 (to display the entire video signal) or 

Overscan

 (to display a cropped video signal) 

from the drop-down menu beside 

Mode

:

The underscan/overscan settings for a video widget 

appear in the list of properties for its layout.

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments