manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 76 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 76

66

Operation of the Monitor Wall

3

The Assign channel to [component] shortcut menu appears (where [component] will be monitor, 
video, UMD, tally, audio meter, status alarm, time code, metadata display, or clock, depending on the 
widget you clicked).

Assign channel to monitor menu

The current channel assignment has a check mark on the menu, and the input card associated with this 
channel appears in italics.

2. Navigate to the appropriate Channel [number] and then press ENTER on the RCP2 to select it. 

Assigning a Channel to a Widget by Using the Mouse

To assign a channel to a widget, by using the mouse:

1. Right-click the widget that is to be assigned a channel.

Current channel with check box

Current input group in italics

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments