Miranda Kaleido-X (4RU), User Manual, Page: 79 / 388

Changing Crosspoints
69
2. On the shortcut menu, point to Send to [router] output (where [router] will be the name of the first
logical router mapped to the KXO-24Router cards where this input can be sent), navigate to the
appropriate logical output number, and select it.
The source signal displayed on the monitor is routed to the selected destination.
Changing Channels Assignments on a Kaleido-X Configured as a Router
To change a widget’s source assignment by using a router control device or application:
• Apply a crosspoint change to route the desired Kaleido-X channel to the video window whose source
assignment you wish to change on the monitor wall, in the same way you would do for any router
controlled by the device or application you have.
The video from the first video level assignment within the selected channel appears in the video
window.
When the current layout is reloaded, either of the following two situations may apply:
• No channel: If there was no channel associated with the widget, then he Kaleido-X will remember
the new source assignment.