manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 2 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 2

ii

©Copyright Miranda Technologies Inc.

All rights reserved.

 ATTENTION: please read the following terms and conditions carefully. By using Kaleido-X documentation, 
you agree to the following terms and conditions:

Miranda Technologies Inc. hereby grants permission and license to owners of Kaleido-X to use their 
product manuals for their own internal business use. Manuals for Miranda Technologies Inc. products may 
not be reproduced or transmitted in any form or by any means, electronic or mechanical, including 
photocopying and recording, for any purpose unless specifically authorized in writing by Miranda 
Technologies Inc. 

A Miranda Technologies Inc. manual may have been revised to reflect changes made to the product during 
its manufacturing life. Thus, different versions of a manual may exist for any given product. Care should be 
taken to ensure that one obtains the proper manual version for a specific product serial number.

Information in this document is subject to change without notice and does not represent a commitment 
on the part of Miranda Technologies Inc.

Title

Kaleido-X User’s Manual

Part Number

M770-2800-106

Revision

24 December 2008 12:08 am

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments