Miranda Kaleido-X (4RU), User Manual, Page: 367 / 388

Detailed Directions
357
From Kaleido-X to/from NTP Server
The following ports, used for communications to/from Network Time Protocol servers, are open by default
on all Kaleido-X systems:
Detailed Directions
Assigning an IP Address to Each Device in Your System
Kaleido-X
To configure a Kaleido-X on a TCP/IP network:
1. Assign an IP address, and specify the appropriate network mask, gateway address, and a system name
for the Kaleido-X.
Refer to “Configuring the Kaleido-X” on page 15.
2. Configure a client PC.
Refer to “Changing the Client PC’s IP Address’” on page 13.
3. Configure the Kaleido-RCP2.
Refer to “Configuring the Kaleido-RCP2” on page 19.
Kaleido-RCP2
To assign an IP address to the Kaleido-RCP2:
• Connect the RJ-45 Ethernet connector to the Kaleido-RCP2. The RCP2 draws its power from the
Ethernet cable.
Refer to “Configuring the Kaleido-RCP2” on page 19.
Audio Bridge Terminal (ABT)
To assign an IP address to the ABT:
• Connect the RJ-45 Ethernet connector to the ABT. The ABT draws its power from the Ethernet cable.
Refer to “Configuring an Audio Bridge Terminal” on page 22.
Service Port Transport Notes
NTP 123 TCP Used for Network Time Protocol synchronization. Port needs to be
open in both directions.