manualshive.com logo in svg

Miranda Kaleido-X (4RU), User Manual, Page: 25 / 388

Share
Download
Miranda Kaleido-X (4RU) User Manual Download Page 25

Step 2 – Networking Setup

15

5. Type an IP address in the same range as the default IP address of the Kaleido-X frame. For example, if 

the IP address of the Kaleido-X frame is “10.0.3.70”, then the IP address of your client PC could be 
“10.0.3.123”. If you are unsure, contact your network administrator.

6. Type a subnet mask in the same range as that of the Kaleido-X.

7. Click OK.

8. In Local Area Connection Properties, click OK.

Configuring the Kaleido-X

To change the Kaleido-X’s system IP address, and adjust your system’s configuration, do the 
following:

1. Configure your client PC with an IP address in the same range as the IP address of the Kaleido-X.

See “Changing the Client PC’s IP Address’” on page 13.

2. Open a Web browser window and type the IP address of the Kaleido-X frame (with Kaleido-X software 

version 2.10 or later):

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Reviews:

No comments