Minolta DI450, Service Manual, Page: 270 / 271

T-79
6. RESETTING THE MAINTENANCE CODE DISPLAY
6-1. Details of Maintenance Codes
6-2. Resetting the Maintenance Code Display
(1) Entering the Tech. Rep. Mode
<Procedure>
1. Press the Utility key.
2. Touch Meter Count.
3. Press the following keys in this order: Stop
→
0
→
0
→
Stop
→
0
→
1.
4. Select Tech. Rep. Mode.
(2) Resetting the Maintenance Code Display
• M2: Waste Toner
<Resetting procedure>
1. Enter the Tech. Rep. mode.
2. Select “Counter.”
3. Select “Consumables.”
4. Select the count of Waste Toner.
5. Press the Clear key.
• M3: Web
<Resetting procedure>
1. Enter the Tech. Rep. mode.
2. Select “Counter.”
3. Select “Consumables.”
4. Select the count of Web.
5. Press the Clear key.
Code Description
M2
The count of “Waste Toner” of the Consumables counter reaches a predeter-
mined value before the setting value.
M3 The count of “Web” of the Consumables counter reaches the setting value.