Minolta DI450, Service Manual, Page: 105 / 271

D-86
Setting Instructions
If width A is longer than the specifications, make the setting value smaller than the current
one.
If width A is shorter than the specifications, make the setting value greater than the current
one.
8. Press the Start key to let the copier produce a test pattern.
9. Check to see if width A on the test pattern is up to the specifications.
If it is outside the specified range, change the setting value and make a check again.
10. If width A falls within the specified range, touch [END] to validate the setting value.
6. Press the Clear key to clear the current
setting value.
4002D510CB
Use to clear the
setting value.
Use to enter the
setting value.
Use to change the
+ or - sign.
4
7
5
8
0
3
6
9
C
7. Use the 10-key pad to change the setting
value.
NOTE
Use the Access key to select the sign of
+ or -.
4002D511CB
Setting Value