Minolta DI450, Service Manual, Page: 12 / 271

PS-5
NOTES
•
Even when the PC Drum is only locally dirtied, wipe the entire surface.
•
Do not expose the PC Drum to direct sunlight. Clean it as quickly as possible even under
interior illumination.
•
If dirt remains after cleaning, repeat the entire procedure from the beginning one more
time.
✽
Only for Products Employing an Imaging Cartridge.
1. During Transportation/Storage:
•
The storage temperature is in the range between –20°C and +40°C (-4°F and +104°F).
•
In summer, avoid leaving the Imaging Cartridge in a car for a long time.
2. Handling:
•
Store the Imaging Cartridge in a place that is not exposed to direct sunlight.
3. Precautionary Information on the PC Drum Inside the Imaging Cartridge:
•
Use care not to contaminate the surface of the PC Drum with oil-base solvent, finger-
prints, and other foreign matter.
•
Do not scratch the surface of the PC Drum.
•
Do not attempt to wipe clean the surface of the PC Drum.
3. Soak a small amount of either ethyl alcohol or iso-
propyl alcohol into a clean, unused Dust-Free Cot-
ton Pad which has been folded over into quarters.
Now, wipe the surface of the PC Drum in one con-
tinuous movement from its rear edge to its front
edge and off its surface one to two times.
✽
Never move the Pad back and forth.
1076D003
4. Using the SAME face of the Pad, repeat the proce-
dure explained in the latter half of step 3 until the
entire surface of the PC Drum has been wiped.
Always OVERLAP the areas when wiping. Two
complete turns of the PC Drum would be appropri-
ate for cleaning.
1076D004
Handling of the Imaging Cartridge