Minolta DI450, Service Manual, Page: 143 / 271

S-2
1. HDD Lamp
• Lights up to indicate that the Hard Disk
Drive Kit (option) is being accessed.
2. Access Key
• Press to enter the access number when
Copy Track of the Administrator mode
available.
Press the access Key.
3. Energy Saver Key
• Press to set machine into the Energy
Saver mode.
4. Interrupt Key
• Press to select the Interrupt mode.
5. Panel Reset Key
• Press to set the machine into the initial
mode, clearing all settings made on the
control panel.
6. Clear Key
• Clear the various numeric values.
7. Stop Key
• Stop a print cycle.
• Stop a scanning cycle.
8. Start Key
• Start a print cycle.
9. Touch Panel
• Shows various screens and message.
10. Mode Check Key
• Press to show the Mode Check screen.
11. Original Key
• Press to select the Mixed Orig. Detec-
tion and other document-related func-
tions setting screen.
12. Job List Key
• Press to check for the settings made for
a job (Mode Check), modify the settings
of a job (Change), delete a job (Delete),
and unlock a job (Unlock).
13. Ready Key
• Lights up to indicate that data can be
transferred.
14. On Line Key
• Press to select either Online or Offline
mode.
15. Display Contrast Knob
• Use to adjust the brightness of the
Touch Panel.
16. Utility Key
• Press to show the Utility Mode menu.
17. Job Recall Key
• Press to show the Job Recall screen on
which you can check or recall a copy-
job program previously stored in mem-
ory.
18. 10-Key pad
• The number of copies to be made.
• The various numeric values.
19. Scan Key
• Press to select the Scanner mode.
20. Copy Key
• Press to select the Copy mode.