Minolta DI450 Service Manual Download Page 173

Page: 173 / 271

S-32

(5)

I/O Check

• The following functions are used to locate the faulty spot.
• Shows the states of the I/O ports when the copier is in the standby state.

✽

For details, see TROUBLESHOOTING.

(6)

I.R. & EDH Check

• Allows the Tech. Rep. to make the various functional tests and adjustments of the IR

(EDH).

Touch Panel

Display

Setting

Trouble

Touch Panel

Display

Setting

Function (IR)

Displays the screens used to adjust and check the IR.

Focus Check

Adjusts the focus level and displays the results of the adjustment
made.

✽

For details, see DIS/REASSEMBLY, ADJUSTMENT.

Zoom (CD)

Adjusts the zoom ratio in the CD direction and displays the results of
the adjustment made.

✽

For details, see DIS/REASSEMBLY, ADJUSTMENT.

Zoom (FD)/Scale

Adjusts the zoom ratio and the position of the scale in the FD direc-
tion, and displays the results of the adjustment made.

✽

For details, see DIS/REASSEMBLY, ADJUSTMENT.

Scale (CD)

Adjusts the position of the scale in the CD direction and displays the
results of the adjustment made.

✽

For details, see DIS/REASSEMBLY, ADJUSTMENT.

Malfunction

Code

Description

Malfunction

Code

Description

C1430

H. sysnc Trouble

C1461/2

Serial GA Trouble

C143E

EDH Trouble

C1499

IR Cooling Fan

C1440

Gain Adjust Trouble

C14XX

IR Sequence Trouble

C1441

CCD Trouble

C1802

SPC Error

Malfunction Code

Description

C1803

Memory Check Trouble

C180X

ECC Control Trouble

C10A1/2, C11EX

Communication (IR)

C10A5/6, C11FX, C1326/34 Com. (Prin.)

C133B

Communication (Option)

C10XX, C11XX

Others

Summary of Contents for DI450
















































































































































































































































































Search results

Summary of Contents for DI450

Reviews:

Minolta DI450, Service Manual, Page: 173 / 271

Search results

Summary of Contents for DI450

Reviews: