Minolta DI450, Service Manual, Page: 167 / 271

S-26
(3) System Input
• This function allows the Tech. Rep. to change the fixed zoom ratios, set the paper size,
define the marketing area, and make other settings.
Touch Panel
Display
Setting (The default is ).
Peripheral Mode Select the type of external I/F operation.
✽
After the setting has been made, touch “END” and turn OFF and
ON the Power Switch.
Touch Panel
Display
Setting (The default is ).
Change Fixed
Zoom Change a fixed zoom ratio to a desired value.
<Procedure>
1. Touch the key of the fixed zoom ratio to be changed.
2. Press the Clear key.
3. Enter the new ratio from the 10-Key Pad.
4. Touch “Input” to validate the new setting.
Paper Size Input Set the paper size.
<Procedure>
1. Select the paper source.
2. Select the paper size.
3. Touch “END” to validate the new setting.
Marketing Area Set the marketing area.
Original Size
Detecting Option Select “ON” when the optional Original Size Detecting Sensor is
mounted.
Tel. # Input Enter the telephone number that will appear on the Touch Panel when
a malfunction occurs in the copier.
<Procedure>
1. Enter the phone number from the 10-Key Pad. Use the Interrupt
key to enter a hyphen “-.”
2. Touch “END” to validate the phone number setting.
Hard Disk Select “ON” if a Hard Disk is mounted.
Highlighted
Mode 1 External I/F operation mode 1
External I/F operation mode 2
Mode 3 External I/F operation mode 3
Mode 2
Highlighted
MSJ MC ME Other Areas
ON
OFF
ON
OFF