Model: MTS200 (1U)
Doc. Ref. no. : - m08/om/201
Issue no.: 03
Page 19 of 195
User’s Manual
3.
KEYPAD:
mas
TER
T-Sync
Model MTS200 device is equipped with keypad buttons to configure
various parameters of Unit. Functionality/usage of each key is described below:
Table 5-1
mas
TER T-Sync Model MTS200 Front Panel Key Definitions
4.
Terminal / USB:
mas
TER
T-Sync
Model MTS200 device is equipped with Front serial console
terminal RS-232 port for serial based device configurations.
5.2
mas
TER T-Sync Model MTS200 Rear Panel
Below figure 5.2 shows
mas
TER
T-Sync
Model MTS200 model rear panel.
Figure 5-2
mas
TER T-Sync Model MTS200 Rear Panel Description
Various outputs of
mas
TER
T-Sync
Model MTS200 device is provided at rear panel of unit. Below is the
description of all possible outputs as per
mas
TER
T-Sync
Model MTS200 configurations with 1 ethernet
output (ETH1) with 1 Gbps support, 1 IRIG-B AM output, 1 IRIG TTL/AM and 4 additional pulse outputs.
There may be other optional outputs present (as per ordered configuration) apart from standard outputs.
KEY
FUNCTION
MENU
To enter in Configuration mode.
HELP
To Display help about every parameter configurations.
OK
To save the final configurations changes done.
ESC
To come back into Run mode or main menu.
UP
Scroll between various parameters in ascending order in
main menu and to change parameters value in
submenu.
DOWN
Scroll between various parameters in descending order
in main menu and to change parameters value in
submenu.
LEFT
To select various available options for the particular
parameter in main menu and scroll between various
parameters in submenu.
RIGHT
To select various available options for the particular
parameter in main menu and scroll between various
parameters in submenu.
