Model: MTS200 (1U)
Doc. Ref. no. : m08/om/201
Issue no. : 03
User’s Manual
Page 162 of 195
Page 162 of 195
masibusGPSNTPAuthType
parameter always.
masibusGPSNTPBCTkey2
.1.3.6.1.4.1.38306.5.8.0
Integer
[read-write]
NTP broadcast key id value if
broadcast is configured for
SYMM
key
broadcast
address 2.
[1 to 9999]
Note: keyid entered should be
a valid key in ntp.keys file of
GPS Clock unit.
masibusGPSNTPService
.1.3.6.1.4.1.38306.5.9.0
Integer
[read-write]
To stop/start ntp service in
device.
[0 / 1]
Note: 0=stop, 1=start
Note: local clk should be
enabled if ntp started in
unlock conditions
SNMP Branch
: masibusGPSSNMP
Variable
OID
Data Type
[read/write]
Description [Values]
masibusGPSSNMPMngr1IP
.1.3.6.1.4.1.38306.6.1.0
string
[read-write]
SNMP Manager1 v4/v6 IP
address.
Max chars: 39
Format: Valid v4/v6 address
masibusGPSSNMPMngr1Ver
.1.3.6.1.4.1.38306.6.2.0
Integer
[read-write]
SNMP version for Manager 1
[0 / 1 / 2 / 3]
Note: 0 is special case to
disable
SNMP
communications with SNMP
Manager1.
masibusGPSSNMPROCommunit
y1
.1.3.6.1.4.1.38306.6.3.0
string
[read-write]
SNMP Manager1 community
string for SNMP v1, v2c read
only [walk, get] operation.
min chars: 4, max chars: 30
masibusGPSSNMPRWCommunit
y1
.1.3.6.1.4.1.38306.6.4.0
string
[read-write]
SNMP Manager1 community
string for SNMP v1, v2c
read/write [walk, get, set]
operation.
min chars: 4, max chars: 30
masibusGPSSNMPMngr1Permiss
ion
.1.3.6.1.4.1.38306.6.5.0
string
[read-write]
SNMP Manager1 community
read/write
permissions
for
SNMP v1, v2c read/write
[walk, get, set] operation.
max chars: 2
[ro / rw]
masibusGPSSNMPMngr1TrapEn
able
.1.3.6.1.4.1.38306.6.6.0
Integer
[read-write]
SNMP trap enable for SNMP
Manager1 for v1/v2/v3.
[0 / 1]
Note: 0=disable, 1=enable
masibusGPSSNMPMngr1TrapCo
mmunity
.1.3.6.1.4.1.38306.6.7.0
string
[read-write]
Community string applicable
for trap receiving Manager for
v1/v2 only.
min chars: 4, max chars: 30
masibusGPSSNMPMngr1v3User
.1.3.6.1.4.1.38306.6.8.0
string
SNMPv3
username
for
