Model: MTS200 (1U)
Doc. Ref. no. : - m08/om/201
Issue no.: 03
Page 161 of 195
User’s Manual
[read-write]
unlock conditions
[0 to 15]
Note: stratum applicable on
ntp output will be 1
during unlock.
masibusGPSNTPAuthType
.1.3.6.1.4.1.38306.5.3.0
string
[read-write]
NTP authentication type
[NONE / SYMM / AUTO]
Note: Autokey settings can be
done only by webserver.
masibusGPSNTPBCTEnable
.1.3.6.1.4.1.38306.5.4.0
Integer
[read-write]
Ntp broadcast status
[0 / 1]
Note: 0=disable, 1=enable
masibusGPSNTPBCTAddr1
.1.3.6.1.4.1.38306.5.5.0
string
[read-write]
Broadcast v4/v6 IP address
used
by
ntp
broadcast/multicast.
Max chars: 39
Format: Valid v4/v6 address
masibusGPSNTPBCTInterval1
.1.3.6.1.4.1.38306.5.6.0
Integer
[read-write]
NTP broadcast interval in
seconds
for
broadcast
address 1
[16 / 32 / 64 / 128 / 256 / 512
/ 1024]
Note: units in seconds
masibusGPSNTPBCTAuth1
.1.3.6.1.4.1.38306.5.7.0
string
[read-write]
NTP authentication type for
NTP broadcast address 1
[NONE / SYMM / AUTO]
Note: This will depend on
masibusGPSNTPAuthType
parameter always.
masibusGPSNTPBCTkey1
.1.3.6.1.4.1.38306.5.8.0
Integer
[read-write]
NTP broadcast key id value if
broadcast is configured for
SYMM key for broadcast
address 1.
[1 to 9999]
Note: keyid entered should be
a valid key in ntp.keys file of
GPS Clock unit.
masibusGPSNTPBCTAddr2
.1.3.6.1.4.1.38306.5.5.0
string
[read-write]
Broadcast v4/v6 IP address
used
by
ntp
broadcast/multicast.
Max chars: 39
Format: Valid v4/v6 address
masibusGPSNTPBCTInterval2
.1.3.6.1.4.1.38306.5.6.0
Integer
[read-write]
NTP broadcast interval in
seconds
for
broadcast
address 2
[16 / 32 / 64 / 128 / 256 / 512
/ 1024]
Note: units in seconds
masibusGPSNTPBCTAuth2
.1.3.6.1.4.1.38306.5.7.0
string
[read-write]
NTP authentication type for
NTPbroadcast address 2
[NONE / SYMM / AUTO]
Note: This will depend on
