Model: MTS200 (1U)
Doc. Ref. no. : - m08/om/201
Issue no.: 03
Page 49 of 195
User’s Manual
*
:
Cursor will start blinking once user enters this mode by pressing “OK” key. To change specific digit,
use “UP” / “DOWN” arrow keys and to change the position of blinking cursor use “LEFT” / ”RIGHT” arrow
keys. UP/DOWN arrow keys will update the digit on which cursor is blinking.
After value is edited, press “OK” again to save the parameter. After user presses “OK” key, user will
return to main menu again.
User can switch between EVENT1, EVENT2, EVENT3 and EVENT4 menu using “LEFT” and “RIGHT”
key and follow above steps to configure the parameter.
10. EVENT ON TIME
ALL additional events 1 to 4 outputs can be also configured for ON duration time (duty cycle) for above
configured respective event period time. The ON time can be configured from 50 milliseconds to
maximum 50% of configured respective EVENT period in milliseconds. Units of EVENT ON Time
for EVENT 1 to 4 is in milliseconds.
