Model: MTS200 (1U)
Doc. Ref. no. : - m08/om/201
Issue no.: 03
Page 43 of 195
User’s Manual
UP
Scroll between various parameters in ascending order in main menu and to
change parameters value in submenu.
DOWN
Scroll between various parameters in descending order in main menu and to
change parameters value in submenu.
LEFT
To select various available options for the particular parameter in main menu
and scroll between various parameters in submenu.
RIGHT
To select various available options for the particular parameter in main menu
and scroll between various parameters in submenu.
Table 9-1 Key Functions
For all main menu parameters, go to that parameter using “UP” / ”DOWN” key till the parameter you want
to
change is available on display. After that using “LEFT” / “RIGHT” keys go to desired option of that
parameter and press “OK” key to save changed parameter. “OK” key is required to save the changes
configured by user. Once “OK” key is pressed, on display "Configuring....." message will be displayed
which indicates MTS200 is saving your configurations. Wait till this message is there on display.
There are two passwords for configuring
mas
TER
T-Sync
Model MTS200
through keypad. One is user-
defined password (0001 to 9999.), which can be changed by the user. By factory set, this password is
„
0001
‟. Another is Immortal Password that cannot be changed by any user and it kept confidential to
Masibus Service Engineers. Users are recommended to change the user-defined password as per there
requirement.
INFORMATION
Password of configuration through keypad and password of configuration
through serial terminal are independent.
It is operator‟s responsibility to remember the configured password if it is
changed from factory set password.
It is necessary to press OK key after changing any previous configuration
through keypad, failing of which the particular parameter will restore to its
previous setting.
If no option is selected or keypad button is pressed for 60 seconds
interval, device will exit from keypad menu and display run mode
parameters.
Flowchart of Keypad Menu represented in below figure.
