Model: MTS200 (1U)
Doc. Ref. no. : m08/om/201
Issue no. : 03
User’s Manual
Page 102 of 195
Page 102 of 195
10 Serial Communication and Configuration
mas
TER
T-Sync
Model MTS200 device has console terminal at front panel of instrument which is female
DB-9 connector operating on RS-232 electrical standards. This terminal can be used to configure device
parameters when console terminal of device is connected to RS-232 terminal of computer using 9 pin
CROSS Cable (refer below section for cable connections
Figure 10-1 COM2/Serial Console terminal Cable Connections
Connect one end of the cross cable to the serial console terminal of device and other end to an available
serial port on your local computer. (If there is no RS-
232 terminal in user‟s computer, user can use USB-
To-Serial convertor. Masibus do not provide USB-To-Serial convertor as part of accessories supplied with
mas
TER
T-Sync
Model MTS200 device).
It is recommended to use
putty.exe
for communicating with MTS200 through front serial console port or
SSH or Telnet medium from windows based PC or Server. Putty.exe can be downloaded from
website. It is free and reliable software.
In windows based PC, hyperterminal can also be used but user may encounter problems of limited
hyperterminal screen size when list of any mode is larger than provided screen size. This problem will not
be faced through putty software.
