Model: MTS200 (1U)
Doc. Ref. no. : - m08/om/201
Issue no.: 03
Page 171 of 195
User’s Manual
Figure 13-5 MTS200 Webserver Network Configuration with IPv6
To configure network parameters of eth0 and eth1 of MTS200, user need to enter respective data in
mentioned field in network webpage. In order to configure network settings of eth0 and eth1, first select
the tickbox of respective eth interface and then settings of that eth can be edited. However, if user wants
DHCP option on eth0 and eth1, user need to just tick the checkbox in DHCP field respective interface.
For each eth interface, IP address, Subnet Mask, gateway can be configured in v4 format. If DHCP is
enabled in any of the interface, MTS200 will automatically acquire IP address and other network
parameters of that interface from DHCP server in network. IP acquired by DHCP can be viewed on front
panel LCD display via keyp
ad or “Network Status” webpage or it can be viewed in SNMP.
To configure network parameters of eth0 and eth1 of MTS200 with IPv6, user need to enter respective
data in mentioned filed in network webpage. In order to configure network settings of eth0 and eth1, first
select the tick box of respective eth interface and then settings of that eth can be edited. If user want
Autoconf option then tick the checkbox in autoconf field of respective interface.
If autoconf is enabled , MTS200 will automatically acquire IP address and other parameter of that
interface.
User can view live ethernet parameter in “Network Status” webpage on the webserver.
