Model: MTS200 (1U)
Doc. Ref. no. : - m08/om/201
Issue no.: 03
Page 71 of 195
User’s Manual
8
= To check MTS200 ntp driver output status. This provides ntp driver status equivalent to status
generated by “ntpq -p” command in ntp client systems.
To configure basic NTP settings:
For configuring basic NTP settings, operator have to select option “2” in command and then press “enter”
from NTP main menu page.
After giving above option, user have to select option “1” to view current NTP settings or option “2” to
change current NTP settings. Please refer below figure for more details.
Command
Parameter
Applicable Value
Description
1
Local Clock Srvs.
0 / 1
Disable(0) or enable(1) local
clock configuration
2
Local Clock Stratum
0 to 15
Stratum applicable during
MTS200 unlock conditions
3
AUTH. Key
NONE/SYMM/AUTO NTP authentication type for
ntp service
4
Autokey Identity Scheme
PC / IFF
Authentication
Identity
scheme
applicable
for
Autokey
[AUTO]
type
authentication
as
per
parameter 3
5
BCAST. Srvs.
0 / 1
Disable(0) or enable(1) ntp
broadcast / multicast
6
BCAST. Address 1
xxx.xxx.xxx.xxx
NTP v4 broadcast/multicast
address or v6 multicast
address 1
7
BCAST. Interval 1
16/32/64/128/
256/512/1024
NTP broadcast interval time
in seconds for BCAST.
Address 1
8
BCAST. Key. 1
NONE/SYMM/AUTO NTP
authentication
type
applicable for ntp broadcast.
This can be NONE or has to
be same as AUTH. Key
