Model: MTS200 (1U)
Doc. Ref. no. : m08/om/201
Issue no. : 03
User’s Manual
Page 174 of 195
Page 174 of 195
Once user modify the required data, click on “Save” options provided at end of page. This will save the
changed parameters in MTS200
. Other options provided at end of page include “Default Configurations”
used to default the settings of GENERAL parameters, “Restore Configurations” which is used to restore
previous saved settings if user have defau
lted all parameters and “View Configurations” to view the
current GENERAL parameters values. User need to click on “Save” option after doing “Default
Configurations” or “Restore Configurations” or change on any parameter.
“Security” Webpage:
For MTS200 Security settings for NTP, HTTPS and SSH
, user need to navigate and select the “Security”
option in menu index. After, selecting below webpage will be displayed.
NTP Authentication:
MTS200 provides ntp output compatible with verison 2/3/4. NTP version 3 authentication is supported
through NTP Symmetric key based method while NTPv4 supports NTP symmetric key as well as Autokey
based PC and IFF scheme authentication.
For complete understanding of NTP Authentication using both methods, refer section 11.3.3.4.
Figure 13-8 MTS200 Webserver Security Page
