Model: MTS200 (1U)
Doc. Ref. no. : - m08/om/201
Issue no.: 03
Page 61 of 195
User’s Manual
To START/STOP any service follow steps:
1. Go to specific service
2. Press OK key
3. Using UP/DOWN key change START/STOP option.
4. Press OK key
User need to restart the particular service if there is any change in those particular service configurations.
NTP PARAMETERS:
MTS200 act as stratum 1 NTP Server for NTP clients in network. However, during UNLOCK conditions,
user can configure internal stratum from 0 to 15 value. Also, User can make local internal clock disable if
not required. However, it is always recommended to keep internal LOCK clock enabled because during
unlock conditions, MTS200 works on internal clock. If internal clock is disabled, MTS200 may not give
correct time.
