Model: MTS200 (1U)
Doc. Ref. no. : m08/om/201
Issue no. : 03
User’s Manual
Page 24 of 195
Page 24 of 195
6 Installation
Before beginning with unit installation, please follow important safety statements for avoiding installation
practices causing malfunctioning of the device as mentioned below.
OPERATION RELIABILITY
To minimize the possibility of fire or shock hazards, do not expose this
instrument to rain or excessive moisture
Do not use this instrument in areas under hazardous conditions such as
excessive shock, vibration, dirt, moisture, corrosive gases or oil. The ambient
temperature of the areas should not exceed the maximum rating specified
WARNING
It is recommended to get the installation of this product to be done by
authorized service personnel of the manufacturing company or by the trained
and qualified operator in co-ordination with authorized service personnel of
the manufacturer company.
Installation of the equipment is to be complied in accordance with local and
national electrical codes.
This equipment is sensitive to Electrostatic Discharge (ESD). Observe all
ESD safeguards while using this equipment.
OPERATION RELIABILITY
This equipment can be damaged if incorrect power source voltage is applied.
This equipment can be damaged if power source is applied with incorrect
polarity on its respective terminal.
Never plug unit power supply connector or power supply cables in terminal
while main power source is ON.
WARNING
This equipment should be always used with earth grounded. Never defeat the
ground connector or operate the equipment in the absence of suitable earth
ground connection.
