Lincoln 2017 MKC Owner'S Manual Download Page 40

Page: 40 / 538

Then...

If...

The Belt-Minder feature will not activate.

You and the front seat passenger buckle your safety belts before you
switch the ignition on or less than 1-2 minutes elapse after you switch

the ignition on...

The Belt-Minder feature activates, the safety belt warning light illumin-

ates and a warning tone sounds for 6 seconds every 25 seconds,

repeating for about 5 minutes or until you and the front seat passenger

buckle your safety belts.

You or the front seat passenger do not buckle your safety belts before
your vehicle reaches at least 6 mph (9.7 km/h) and 1-2 minutes elapse

after you switch the ignition on...

The Belt-Minder feature activates, the safety belt warning light illumin-

ates and a warning tone sounds for 6 seconds every 25 seconds,

repeating for about 5 minutes or until you and the front seat passenger

buckle your safety belts.

The safety belt for the driver or front passenger is unbuckled for about

1 minute while the vehicle is traveling at least 6 mph (9.7 km/h) and

more than 1-2 minutes elapse after you switch the ignition on...

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Seatbelts

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2017 MKC

Reviews:

Related manuals for 2017 MKC

Brands by name

Popular brands

Lincoln 2017 MKC, Owner'S Manual

Search results

Summary of Contents for 2017 MKC

Reviews:

Related manuals for 2017 MKC

Brands by name

Popular brands