manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

where required by law enforcement, other
government authorities or other third
parties acting with lawful authority. Other
parties may seek to access the information
independently of Ford Motor Company and
Ford of Canada.

Note: Including to the extent that any law
pertaining to Event Data Recorders applies
to SYNC or its features, please note the
following: Once 911 Assist (if equipped) is
enabled (set ON), 911 Assist may, through
any paired and connected cell phone,
disclose to emergency services that the
vehicle has been in a crash involving the
deployment of an airbag or, in certain
vehicles, the activation of the fuel pump
shut-off. Certain versions or updates to 911
Assist may also be capable of being used
to electronically or verbally provide to 911
operators the vehicle location (such as
latitude and longitude), and/or other details
about the vehicle or crash or personal
information about the occupants to assist
911 operators to provide the most
appropriate emergency services. If you do
not want to disclose this information, do
not activate the 911 Assist feature.   See
SYNC™ 3 (page 366).

Additionally, when you connect to Traffic,
Directions and Information (if equipped,
U.S. only), the service uses GPS technology
and advanced vehicle sensors to collect
the vehicle’s current location, travel
direction, and speed (“vehicle travel
information”), only to help provide you with
the directions, traffic reports, or business
searches that you request. If you do not
want Ford or its vendors to receive this
information, do not activate the service. For
more information, see Traffic, Directions
and Information, Terms and Conditions.
See SYNC™ 3 (page 366).

CALIFORNIA PROPOSITION 65

WARNINGS

Some constituents of engine exhaust,
certain vehicle components, certain

fluids contained in vehicles and certain
products of component wear contain or emit
chemicals known to the State of California
to cause cancer and birth defects or other
reproductive harm.

11

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Introduction

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

BrandMotion 1009-6503 Installation Instructions Manual preview
1009-6503
Brand: BrandMotion Pages: 8
Mercedes-Benz R-Class Owner'S Manual preview
R-Class
Brand: Mercedes-Benz Pages: 373
Acura 2006 TSX Owner'S Manual preview
2006 TSX
Brand: Acura Pages: 2
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
Chevrolet Impala Limited 2014 Owner'S Manual preview
Impala Limited 2014
Brand: Chevrolet Pages: 356
Westfalia 305 158 Mounting Instructions preview
305 158
Brand: Westfalia Pages: 10
Draw tite 24963 Installation Instructions preview
24963
Brand: Draw tite Pages: 4
EFILive CM2350B User Manual preview
CM2350B
Brand: EFILive Pages: 25
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
Safe Fleet PRIME DESIGN HXR-269-E-UM3-80 Manual preview
PRIME DESIGN HXR-269-E-UM3-80
Brand: Safe Fleet Pages: 12
Mazda 2008 B2300 Truck Owner'S Manual preview
2008 B2300 Truck
Brand: Mazda Pages: 280
Mopar 77072498AB Manual preview
77072498AB
Brand: Mopar Pages: 18
Waeco Perfect Fit MBM120 Installation Instructions preview
Perfect Fit MBM120
Brand: Waeco Pages: 3
Or-Fab HD Bumper Installation Instructions preview
HD Bumper
Brand: Or-Fab Pages: 4
Jaeger 21010508J Fitting Instructions Manual preview
21010508J
Brand: Jaeger Pages: 14
Mercedes-Benz A 150 Owner'S Manual preview
A 150
Brand: Mercedes-Benz Pages: 305
Volvo S90 TWIN ENGINE Owner'S Manual preview
S90 TWIN ENGINE
Brand: Volvo Pages: 662

Brands by name

Popular brands

Load more brands