manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

OTHERWISE), THE ENTIRE LIABILITY OF
TELENAV AND OF ALL OF TELENAV'S
SUPPLIERS SHALL BE LIMITED TO THE
AMOUNT ACTUALLY PAID BY YOU FOR
THE TELENAV SOFTWARE. SOME
STATES AND/OR JURISDICTIONS DO
NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU.

6. Arbitration and Governing Law

•

You agree that any dispute, claim or
controversy arising out of or relating to
this Agreement or the TeleNav Software
shall be settled by independent
arbitration involving a neutral arbitrator
and administered by the American
Arbitration Association in the County of
Santa Clara, California. The arbitrator
shall apply the Commercial Arbitration
Rules of the American Arbitration
Association, and the judgment upon the
award rendered by the arbitrator may be
entered by any court having jurisdiction.
Note that there is no judge or jury in an

arbitration proceeding and the decision
of the arbitrator shall be binding upon
both parties. You expressly agree to
waive your right to a jury trial. This
Agreement and performance hereunder
will be governed by and construed in
accordance with the laws of the State of
California, without giving effect to its
conflict of law provisions. To the extent
judicial action is necessary in connection
with the binding arbitration, both TeleNav
and you agree to submit to the exclusive
jurisdiction of the courts of the County of
Santa Clara, California. The United
Nations Convention on Contracts for the
International Sale of Goods shall not
apply.

7. Assignment

•

You may not resell, assign, or transfer
this Agreement or any of your rights or
obligations, except in totality, in
connection with your permanent transfer
of the TeleNav Software, and expressly
conditioned upon the new user of the
TeleNav Software agreeing to be bound
by the terms and conditions of this

Agreement. Any such sale, assignment
or transfer that is not expressly permitted
under this paragraph will result in
immediate termination of this Agreement,
without liability to TeleNav, in which case
you and all other parties shall
immediately cease all use of the TeleNav
Software. Notwithstanding the foregoing,
TeleNav may assign this Agreement to
any other party at any time without
notice, provided the assignee remains
bound by this Agreement.

8. Miscellaneous

8.1

This Agreement constitutes the entire
agreement between TeleNav and you with
respect to the subject matter hereof.

8.2

Except for the limited licenses expressly
granted in this Agreement, TeleNav retains
all right, title and interest in and to the
TeleNav Software, including without
limitation all related intellectual property
rights. No licenses or other rights which are

517

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Appendices

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
Ecco Gemineye EC2014-C Installation Instructions Manual preview
Gemineye EC2014-C
Brand: Ecco Pages: 10
Ecco Reflex 5500 Series Installation And Operating Instructions Manual preview
Reflex 5500 Series
Brand: Ecco Pages: 12
Vauxhall INSIGNIA 2017 Owner'S Manual preview
INSIGNIA 2017
Brand: Vauxhall Pages: 323
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
SnapPad EQ Round Installation Instructions preview
EQ Round
Brand: SnapPad Pages: 5
Toro 137-1019 Installation Instructions Manual preview
137-1019
Brand: Toro Pages: 24
CALIMA 46008 Operating Instructions Manual preview
46008
Brand: CALIMA Pages: 9
JKS OGS125 Installation Instructions preview
OGS125
Brand: JKS Pages: 3
LaserLine 921K Operating Instructions preview
921K
Brand: LaserLine Pages: 4
Opel MERIVA 2014 Brochure & Specs preview
MERIVA 2014
Brand: Opel Pages: 44
Setma E12AU02002 Instruction Manual preview
E12AU02002
Brand: Setma Pages: 16
Whispbar K408W Fitting Instructions Manual preview
K408W
Brand: Whispbar Pages: 15
Audi Q7 V12 TDI QUATTRO - Brochure preview
Q7 V12 TDI QUATTRO -
Brand: Audi Pages: 20
Prime Design VRI3-FT31B Assembly Manual preview
VRI3-FT31B
Brand: Prime Design Pages: 16
Hollywood Racks HR4000 Assembly And Instruction Manual preview
HR4000
Brand: Hollywood Racks Pages: 8
Dodge 2009 RAM TRUCK Owner'S Manual preview
2009 RAM TRUCK
Brand: Dodge Pages: 543
walser Proguard 100021 User Instructions preview
Proguard 100021
Brand: walser Pages: 12

Brands by name

Popular brands

Load more brands