manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

When washing:
•

Take care when using a power washer
to clean the engine. The high-pressure
fluid could penetrate the sealed parts
and cause damage.

•

Do not spray a hot engine with cold water
to avoid cracking the engine block or
other engine components.

•

Spray Motorcraft Engine Shampoo and
Degreaser on all parts that require
cleaning and pressure rinse clean. In
Canada, use Motorcraft Engine Shampoo.

•

Never wash or rinse the engine while it
is hot or running; water in the running
engine may cause internal damage.

•

Never wash or rinse any ignition coil,
spark plug wire or spark plug well, or the
area in and around these locations.

•

Cover the battery, power distribution box,
and air filter assembly to prevent water
damage when cleaning the engine.

CLEANING THE WINDOWS AND
WIPER BLADES

Car wash chemicals and environmental
fallout can result in windshield and wiper
blade contamination. Dirty windshield and
wipers will result in poor windshield wiper
operation. Keep the windshield and wiper
blades clean to maintain windshield wiper
performance.

To clean the windshield and wiper blades:
•

Clean the windshield with a non-abrasive
glass cleaner. When cleaning the interior
of the windshield, avoid getting any glass
cleaner on the instrument panel or door
panels. Wipe any glass cleaner off these
surfaces immediately.

•

For windshields contaminated with tree
sap, chemicals, wax or bugs, clean the
entire windshield using steel wool (no
greater than 0000 grade) in a circular
motion and rinse with water.

•

Clean the wiper blades with isopropyl
rubbing alcohol or windshield washer
concentrate.

Note:  Do not use razor blades or other
sharp objects to clean or remove decals from
the inside of the heated rear window.  The
vehicle warranty does not cover damage
caused to the heated rear window grid lines.

CLEANING THE INTERIOR

WARNINGS

Do not use cleaning solvents, bleach
or dye on the vehicle’s safety belts, as

these actions may weaken the belt webbing.

On vehicles equipped with
seat-mounted airbags, do not use

chemical solvents or strong detergents. Such
products could contaminate the side airbag
system and affect performance of the side
airbag in a collision.

Note: Follow the same procedure for
cleaning leather seats when cleaning leather
interior.  See Cleaning Leather Seats (page
311).

308

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Vehicle Care

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Chevrolet 2013 Spark Specifications preview
2013 Spark
Brand: Chevrolet Pages: 2
V8 equipment EBEX.2 Instruction Manual preview
EBEX.2
Brand: V8 equipment Pages: 17
Hama 00178266 Operating Instruction preview
00178266
Brand: Hama Pages: 75
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2
J. Strong JST506BT Installation Instructions preview
JST506BT
Brand: J. Strong Pages: 2
EUFAB 12014 Manual preview
12014
Brand: EUFAB Pages: 20
DICE DCR-150 Installation Manual preview
DCR-150
Brand: DICE Pages: 1
Hudson Super-Six 1926 Instruction Book preview
Super-Six 1926
Brand: Hudson Pages: 24
Discount Car Stereo A2DIY-JAG98 Quick Start Manual preview
A2DIY-JAG98
Brand: Discount Car Stereo Pages: 11
Hyundai TUCSON 2022 Quick Reference Manual preview
TUCSON 2022
Brand: Hyundai Pages: 32
Ford 2003 Ranger Quick Reference Manual preview
2003 Ranger
Brand: Ford Pages: 2
Toyota 4Runner 2020 Owner'S Manual preview
4Runner 2020
Brand: Toyota Pages: 596
Wallbox commander Installation Manual preview
commander
Brand: Wallbox Pages: 13
Toyota Sienna 2000 Operating Manual preview
Sienna 2000
Brand: Toyota Pages: 277
Yakima RIpCord Manual preview
RIpCord
Brand: Yakima Pages: 12
LAS 10329 Operating Instructions Manual preview
10329
Brand: LAS Pages: 10

Brands by name

Popular brands

Load more brands