manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Important: Remember to replace the
wheel valve stems when the road tires
are replaced on your vehicle.

It is recommended that the two front
tires or two rear tires generally be
replaced as a pair.

The tire pressure sensors mounted in
the wheels (originally installed on your
vehicle) are not designed to be used in
aftermarket wheels.

The use of wheels or tires not
recommended by Ford Motor Company
may affect the operation of your tire
pressure monitoring system.

If the tire pressure monitoring system
indicator is flashing, your system is
malfunctioning. Your replacement tire
might be incompatible with your tire
pressure monitoring system, or some
component of the system may be
damaged.

Safety Practices

WARNINGS

If your vehicle is stuck in snow,
mud, or sand, do not rapidly spin

the tires. Spinning the tires can tear the
tire and cause an explosion. A tire can
explode in as little as three to five
seconds.

Do not spin the wheels over
35 mph (56 km/h). The tires may

fail and injure a passenger or bystander.

Driving habits have a great deal to do
with your tire mileage and safety.

*Observe posted speed limits

*Avoid fast starts, stops and turns

*Avoid potholes and objects on the road

*Do not run over curbs or hit the tire
against a curb when parking

Highway Hazards

No matter how carefully you drive, there
is always the possibility that you may
eventually have a flat tire on the
highway. Drive slowly to the closest safe
area out of traffic. This may further
damage the flat tire, but your safety is
more important.

If you feel a sudden vibration or ride
disturbance while driving, or you suspect
your tire or vehicle has been damaged,
immediately reduce your speed. Drive
with caution until you can safely pull off
the road. Stop and inspect the tires for
damage. If a tire is under-inflated or
damaged, deflate it, remove wheel and
replace it with your spare tire and wheel.
If you cannot detect a cause, have the
vehicle towed to the nearest repair
facility or tire dealer to have the vehicle
inspected.

329

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Wheels and Tires

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Jeep 2009 Wrangler Quick Reference Manual preview
2009 Wrangler
Brand: Jeep Pages: 12
Jeep 2008 Liberty Installation Instructions Manual preview
2008 Liberty
Brand: Jeep Pages: 6
Kargo Master 80070 Assembly Lnstructions preview
80070
Brand: Kargo Master Pages: 13
Kargo Master 4A96L Installation Manual preview
4A96L
Brand: Kargo Master Pages: 21
Kargo Master 40201 Installation Manual preview
40201
Brand: Kargo Master Pages: 4
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
UGREEN Car Cup Holder Phone Mount Manual preview
Car Cup Holder Phone Mount
Brand: UGREEN Pages: 9
Audiovox Code Alarm PROFESSIONAL SERIES CA 5550SST Owner'S Manual preview
Code Alarm PROFESSIONAL SERIES CA 5550SST
Brand: Audiovox Pages: 14
Hyundai Santa Fe 2019 Getting Started Manual preview
Santa Fe 2019
Brand: Hyundai Pages: 18
travall TDG-1301 Fitting Instruction preview
TDG-1301
Brand: travall Pages: 2
Gacell 13553 User Manual preview
13553
Brand: Gacell Pages: 12
Pacbrake HP10098 Installation Manual preview
HP10098
Brand: Pacbrake Pages: 6
Guidosimplex 907P User Manual preview
907P
Brand: Guidosimplex Pages: 8
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
SilverLeaf Electronics VMS 645 CL Owner'S Manual preview
VMS 645 CL
Brand: SilverLeaf Electronics Pages: 16
Gator GRM430EM User Manual preview
GRM430EM
Brand: Gator Pages: 6
travall TDG 1486 Fitting Instructions preview
TDG 1486
Brand: travall Pages: 4
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425

Brands by name

Popular brands

Load more brands