manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

BLIND SPOT INFORMATION
SYSTEM

 (If Equipped)

WARNING

To help avoid injuries, NEVER use the
Blind Spot Information System as a

replacement for using the interior and
exterior mirrors or looking over your shoulder
before changing lanes. The Blind Spot
Information System is not a replacement for
careful driving.

A

A

E124788

The Blind Spot Information System is
designed to aid you in detecting vehicles
that may have entered the blind spot zone
(A). The detection area is on both sides of
your vehicle, extending rearward from the
exterior mirrors to approximately 13 ft (4 m)
beyond the bumper. The system is designed
to alert you if certain vehicles enter the blind
spot zone while driving.

Note: The Blind Spot Information System
does not prevent contact with other vehicles
or objects; nor detect parked vehicles,
people, animals or infrastructure (fences,
guardrails, trees). It’s only designed to alert
you to vehicles in the blind spot zones.

Note: When a vehicle passes quickly through
the blind spot zone, typically fewer than two
seconds, the system does not trigger.

Using the System

The Blind Spot Information System turns on
when you start the engine and you drive your
vehicle forward above 5 mph (8 km/h).

For automatic transmissions, the Blind Spot
Information System remains on while the
transmission is in drive (D). If shifted into
reverse (R) or park (P) the Blind Spot
Information System turns off. Once shifted
back into drive (D), the Blind Spot Information
System turns back on when you drive your
vehicle above 5 mph (8 km/h).

For manual transmissions, the Blind Spot
Information System is on for all gears except
the reverse (R).

Note: The Blind Spot Information System
does not function in reverse (R) or park (P).

System Lights and Messages

E142442

223

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Driving Aids

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
GMC SIERRA 2019 Getting To Know Your preview
SIERRA 2019
Brand: GMC Pages: 20
Roav R5141 Owner'S Manual preview
R5141
Brand: Roav Pages: 10
Haibang HA998 Series Installation Instructions Manual preview
HA998 Series
Brand: Haibang Pages: 6
Dacia 2014 Sandero Driver'S Handbook Manual preview
2014 Sandero
Brand: Dacia Pages: 238
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
Actia SmarTach Manual preview
SmarTach
Brand: Actia Pages: 102
STO N SHO SNS135a Installation Procedures Manual preview
SNS135a
Brand: STO N SHO Pages: 7
Cadillac 54-6219 1954 Shop Manual preview
54-6219 1954
Brand: Cadillac Pages: 409
Fortin THAR-AUD1 Manual preview
THAR-AUD1
Brand: Fortin Pages: 9
Fisher Body FOLDING TOP 1971 Service Manual preview
FOLDING TOP 1971
Brand: Fisher Body Pages: 37
Manik 519952T Installation Instructions preview
519952T
Brand: Manik Pages: 2
KEKO K162 Installation Instructions Manual preview
K162
Brand: KEKO Pages: 13
Road Armor Stealth 4191F Series Install Instructions preview
Stealth 4191F Series
Brand: Road Armor Pages: 5
Coolster CHALLENGER GK-6125A 2018 Manual preview
CHALLENGER GK-6125A 2018
Brand: Coolster Pages: 45
RAM Cargo Van 2014 Owner'S Manual preview
Cargo Van 2014
Brand: RAM Pages: 666
Waeco PerfectView LCD350 Installation And Operating Manual preview
PerfectView LCD350
Brand: Waeco Pages: 36
Axxess OESWC-LAN29H Installation Instructions Manual preview
OESWC-LAN29H
Brand: Axxess Pages: 8

Brands by name

Popular brands

Load more brands