manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Window Lock

E144072

Press the control to lock or unlock the rear
window controls. It will illuminate when you
lock the rear window controls.

Accessory Delay

You can use the window switches for several
minutes after you switch the ignition off or
until you open either front door.

GLOBAL OPENING AND CLOSING

You can use the remote control to operate
the windows with the ignition off.

Note: You can switch this feature on and off
in the information display or contact an
authorized dealer.  See General Information
(page 108).

Note: To operate this feature, make sure the
accessory delay is not switched on.

Opening the Windows

You can open the windows only for a short
time after you unlock your vehicle with the
remote control. After you unlock your vehicle,
press and hold the remote control unlock
button to open the windows. Release the
button once movement starts. Press the lock
or unlock button to stop movement.

Closing the Windows

WARNING

When closing the windows, you should
verify they are free of obstructions and

make sure that children and pets are not in
the proximity of the window openings.

To close the windows, press and hold the
remote control lock button. Release the
button once movement starts. Press the lock
or unlock button to stop movement.

EXTERIOR MIRRORS

Power Exterior Mirrors

WARNING

Do not adjust the mirrors when your
vehicle is moving. This could result in

the loss of control of your vehicle, serious
personal injury or death.

94

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Windows and Mirrors

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Daihatsu F300 Service Manual preview
F300
Brand: Daihatsu Pages: 1718
AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
UltraGauge EM Installation & Operation Manual preview
EM
Brand: UltraGauge Pages: 55
Allen Sports QR545 Instructions preview
QR545
Brand: Allen Sports Pages: 2
Kia Picanto 2015 Quick Reference Manual preview
Picanto 2015
Brand: Kia Pages: 10
Sirius Satellite Radio Streamer GTR Installation Manual preview
Streamer GTR
Brand: Sirius Satellite Radio Pages: 8
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Gatorback Mudflaps GCR53F Mounting Diagram & Instructions preview
GCR53F
Brand: Gatorback Mudflaps Pages: 4
Quadratec 12057.0261 Installation Manual preview
12057.0261
Brand: Quadratec Pages: 12
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
Gator GRM430EM User Manual preview
GRM430EM
Brand: Gator Pages: 6
OHIOSTEEL 1084TR Quick Start Manual preview
1084TR
Brand: OHIOSTEEL Pages: 2
Voxx Electronics CA-510a Installation Instructions Manual preview
CA-510a
Brand: Voxx Electronics Pages: 15
CSL 41802 User Manual preview
41802
Brand: CSL Pages: 8
Kuda 191090 Installation Instruction preview
191090
Brand: Kuda Pages: 3
Mopar 2005-2009 Chrysler 300C Installation Instructions Manual preview
2005-2009 Chrysler 300C
Brand: Mopar Pages: 7
Westin 28-21030 Instructions preview
28-21030
Brand: Westin Pages: 3

Brands by name

Popular brands

Load more brands