manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

•

Driving on flat terrain offers improved fuel
economy as compared to driving on hilly
terrain.

•

Transmissions give their best fuel
economy when operated in the top cruise
gear and with steady pressure on the gas
pedal.

•

Four-wheel-drive operation (if equipped)
is less fuel efficient than two-wheel-drive
operation.

•

Close the windows for high-speed
driving.

DRIVING THROUGH WATER

WARNING

Do not drive through flowing or deep
water as you may lose control of your

vehicle.

Note: Driving through standing water can
cause vehicle damage.

Note: Engine damage can occur if water
enters the air filter.

Before driving through standing water, check
the depth. Never drive through water that is
higher than the bottom of the front rocker
area of your vehicle.

E176360

When driving through standing water, drive
very slowly and do not stop your vehicle.
Your brake performance and traction may
be limited. After driving through water and
as soon as it is safe to do so:

•

Lightly press the brake pedal to dry the
brakes and to check that they work.

•

Check that the horn works.

•

Check that the exterior lights work.

•

Turn the steering wheel to check that the
steering power assist works.

FLOOR MATS

WARNINGS

Always use floor mats that are
designed to fit the foot well of your

vehicle. Only use floor mats that leave the
pedal area unobstructed. Only use floor mats
that are firmly secured to retention posts so
that they cannot slip out of position and
interfere with the pedals or impair safe
operation of your vehicle in other ways.

Pedals that cannot move freely can
cause loss of vehicle control and

increase the risk of serious personal injury.

Always make sure that the floor mats
are properly attached to the retention

posts in the carpet that are supplied with
your vehicle. Floor mats must be properly
secured to both retention posts to make sure
mats do not shift out of position.

250

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Driving Hints

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

ULTIMATE SPEED CARBON Assembly And Safety Advice preview
CARBON
Brand: ULTIMATE SPEED Pages: 19
JANE be cool boosty Manual preview
be cool boosty
Brand: JANE Pages: 21
GMC SIERRA 2019 Getting To Know Your preview
SIERRA 2019
Brand: GMC Pages: 20
Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
FORM FIT HDW 1779 Installation Instructions preview
HDW 1779
Brand: FORM FIT Pages: 2
Subaru 2016 Outback Owner'S Manual preview
2016 Outback
Brand: Subaru Pages: 99
Chariot Carriers 51100913 Instruction Manual preview
51100913
Brand: Chariot Carriers Pages: 3
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
Paccar PACCHARGE AC20 Installation Manual preview
PACCHARGE AC20
Brand: Paccar Pages: 63
Whispbar WB201 Manual preview
WB201
Brand: Whispbar Pages: 14
CARFACE CF145962E Instruction Manual preview
CF145962E
Brand: CARFACE Pages: 16
Acura 08L03-TA1-200A Installation Instructions preview
08L03-TA1-200A
Brand: Acura Pages: 4
v.link CI-VL2-PC-HSD Manual preview
CI-VL2-PC-HSD
Brand: v.link Pages: 19
Honda Civic Hatch 2017 Owner'S Manual preview
Civic Hatch 2017
Brand: Honda Pages: 687
Toyota Camry Hybrid 2012 Warranty & Maintenance Manual preview
Camry Hybrid 2012
Brand: Toyota Pages: 62
Whispbar K408W Fitting Instructions Manual preview
K408W
Brand: Whispbar Pages: 15
RAM Truck 2500 2018 Supplement Manual preview
Truck 2500 2018
Brand: RAM Pages: 32

Brands by name

Popular brands

Load more brands