manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Note: Depending on your remote start
settings, the heated seats may remain on
after you remote start your vehicle. The
heated seats may also turn on when you
start your vehicle if they were on when your
vehicle was turned off.

Rear Seats

 (If Equipped)

WARNING

Persons who are unable to feel pain to
the skin because of advanced age,

chronic illness, diabetes, spinal cord injury,
medication, alcohol use, exhaustion, or other
physical conditions, must exercise care when
using the seat heater. The seat heater may
cause burns even at low temperatures,
especially if used for long periods of time.
Do not place anything on the seat that
insulates against heat, such as a blanket or
cushion, because this may cause the seat
heater to overheat. Do not puncture the seat
with pins, needles, or other pointed objects
because this may damage the heating
element which may cause the seat heater to
overheat. An overheated seat may cause
serious personal injury.

Do not do the following:
•

Place heavy objects on the seat.

•

Operate the seat heater if water or any
other liquid spills on the seat. Allow the
seat to dry thoroughly.

Note: The heated seats will only function
when the engine is running.

The rear seat heat controls are located on
the rear of the center console.

E146322

Press the heated seat symbol to cycle
through the various heat settings and off.
More indicator lights indicate warmer
settings.

CLIMATE CONTROLLED SEATS

 (If

Equipped)

Heated Seats

WARNING

Persons who are unable to feel pain to
the skin because of advanced age,

chronic illness, diabetes, spinal cord injury,
medication, alcohol use, exhaustion, or other
physical conditions, must exercise care when
using the seat heater. The seat heater may
cause burns even at low temperatures,
especially if used for long periods of time.
Do not place anything on the seat that
insulates against heat, such as a blanket or
cushion, because this may cause the seat
heater to overheat. Do not puncture the seat
with pins, needles, or other pointed objects
because this may damage the heating
element which may cause the seat heater to
overheat. An overheated seat may cause
serious personal injury.

Do not do the following:

146

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Seats

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

JANE MICRO Quick Start Manual preview
MICRO
Brand: JANE Pages: 6
Daihatsu G200 Service Manual preview
G200
Brand: Daihatsu Pages: 485
Camcar 40000 Manual preview
40000
Brand: Camcar Pages: 6
Falcon 1990 Installation Instructions And Specifications preview
1990
Brand: Falcon Pages: 8
Carefree Slideout Cover Service Manual preview
Slideout Cover
Brand: Carefree Pages: 12
Genesis Multiple G9F18 AU000 Quick Start Manual preview
Multiple G9F18 AU000
Brand: Genesis Pages: 3
Safe Fleet RVS-218627 Instruction Manual preview
RVS-218627
Brand: Safe Fleet Pages: 38
Phonocar VM338 Mounting Instructions preview
VM338
Brand: Phonocar Pages: 6
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
Thule Kit 2161 Fitting Instructions preview
Kit 2161
Brand: Thule Pages: 2
Pet Gear TRI-FOLD PG9300RF Instruction Manual preview
TRI-FOLD PG9300RF
Brand: Pet Gear Pages: 4
Opel 2013 Corsa Brochure & Specs preview
2013 Corsa
Brand: Opel Pages: 32
travall TDG-1301 Fitting Instruction preview
TDG-1301
Brand: travall Pages: 2
Gacell 13553 User Manual preview
13553
Brand: Gacell Pages: 12
Audi Audi 80 1987 Workshop Manual preview
Audi 80 1987
Brand: Audi Pages: 63
Arrista SG8-19 Installation Manual preview
SG8-19
Brand: Arrista Pages: 2
Honda CRV 2015 Navigation Manual preview
CRV 2015
Brand: Honda Pages: 253
Toyota 2018 yaris Vehicle Instruction Card preview
2018 yaris
Brand: Toyota Pages: 11

Brands by name

Popular brands

Load more brands