manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Note: If a MyKey® is detected, pressing the
button will not affect the on or off status of
the system. You can only change the mode
and intensity settings.

E144813

Press the button located on the left
steering wheel stalk to switch the
system on or off.

System Settings

The system has two optional setting menus
available. To view or adjust them, select
Settings > Driver Assist > Lane Keeping Sys
in the information display using the OK
button on the steering wheel. The system
stores the last known selection for each of
these settings. You do not need to readjust
your settings each time you turn on the
system.

Mode: This setting allows you to select which
of the system features to enable.

E165515

Alert only – Provides a steering wheel
vibration when the system detects an
unintended lane departure.

E165516

Aid only – Provides an assistance steering
torque input toward the lane center when
the system detects an unintended lane
departure.

E165517

Alert

A

Aid

B

Alert + Aid – Provides an assistance steering
torque input toward the lane center. If your
vehicle continues drifting out of the lane, the
system will provide a steering wheel
vibration.

219

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Driving Aids

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
Jetter JX3-BN-CAN Manual preview
JX3-BN-CAN
Brand: Jetter Pages: 4
K&K M5700N Manual preview
M5700N
Brand: K&K Pages: 8
K&K M4700 Manual preview
M4700
Brand: K&K Pages: 20
K&K M3500N Manual preview
M3500N
Brand: K&K Pages: 6
K&K M2500 Manual preview
M2500
Brand: K&K Pages: 3
K&K M1500 Manual preview
M1500
Brand: K&K Pages: 3
RAM 2500 2020 Quick Reference Manual preview
2500 2020
Brand: RAM Pages: 20
Yamaha Yamaha Rhino 660 Instruction Supplement preview
Yamaha Rhino 660
Brand: Yamaha Pages: 3
Trailboss HD86 Fitting Instructions preview
HD86
Brand: Trailboss Pages: 5
Curt Manufacturing 31048 Installation Instructions Manual preview
31048
Brand: Curt Manufacturing Pages: 6
Alfa Romeo 1966 Spider 105 Faq preview
1966 Spider 105
Brand: Alfa Romeo Pages: 46
ULTIMATE SPEED 279619 Instructions For Use And Safety Manuallines preview
279619
Brand: ULTIMATE SPEED Pages: 40
ZAPTEC ZapCharger Portable C1 User Manual preview
ZapCharger Portable C1
Brand: ZAPTEC Pages: 20
Yakima K896 Instructions Manual preview
K896
Brand: Yakima Pages: 12
BMW FXX ATM Emulator User And Installation Manual preview
FXX ATM Emulator
Brand: BMW Pages: 5
Pontiac 2007 G6 Owner'S Manual preview
2007 G6
Brand: Pontiac Pages: 486
Kleinn RS-GM6 Installation Manual preview
RS-GM6
Brand: Kleinn Pages: 8

Brands by name

Popular brands

Load more brands