manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

ENGINE OIL DIPSTICK

E170468

A

B

MIN

A

MAX

B

ENGINE OIL CHECK

1. Make sure that your vehicle is on level

ground.

2. Check the oil level before starting the

engine, or switch the engine off and wait
15 minutes for the oil to drain into the oil
pan.

3. Remove the dipstick and wipe it with a

clean, lint free cloth. Replace the dipstick
and remove it again to check the oil level.

If the oil level is at the minimum mark, add
oil immediately.  See Capacities and
Specifications (page 344).

Do not use supplemental engine oil additives
because they are unnecessary and could
lead to engine damage that may not be
covered by your vehicle warranty.

Note: Make sure that the oil level is between
the minimum and the maximum marks.

Note: The oil consumption of new engines
reaches its normal level after approximately
3,000 mi (5,000 km).

Adding Engine Oil

E142732

Only use oils certified for gasoline engines
by the American Petroleum Institute (API).
An oil with this trademark symbol conforms
to the current engine and emission system
protection standards and fuel economy
requirements of the International Lubricants
Specification Advisory Committee (ILSAC).

WARNINGS

Only add oil when the engine is cold.
If the engine is hot, wait 10 minutes for

the engine to cool down.

Do not remove the filler cap when the
engine is running.

290

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Maintenance

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Lancia Y Owner'S Handbook Manual preview
Y
Brand: Lancia Pages: 191
IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Brand: IAME Pages: 17
iDataLink ADS-ALCA Install Manuals preview
ADS-ALCA
Brand: iDataLink Pages: 30
JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
Cadillac GMC Yukon Denali 2005 Owner'S Manual preview
GMC Yukon Denali 2005
Brand: Cadillac Pages: 456
Saab 900 5 Speed Technical Training Manual preview
900 5 Speed
Brand: Saab Pages: 63
R&G LP0291BK Fitting Instructions Manual preview
LP0291BK
Brand: R&G Pages: 20
Whispbar S17W Fitting Instructions Manual preview
S17W
Brand: Whispbar Pages: 70
Subaru Legacy 2011 Quick Reference Manual preview
Legacy 2011
Brand: Subaru Pages: 19
Gator GT700SD User Manual preview
GT700SD
Brand: Gator Pages: 6
F.lli Menabo CROSS 2 Assembly Instructions Manual preview
CROSS 2
Brand: F.lli Menabo Pages: 16
Dometic LMC Eriba Nova Service Manual preview
LMC Eriba Nova
Brand: Dometic Pages: 24
Ford F-250 Super Duty 2022 Owner'S Manual preview
F-250 Super Duty 2022
Brand: Ford Pages: 740
Fabbri BICI OK 2 Manual preview
BICI OK 2
Brand: Fabbri Pages: 32
Whelen Engineering Company SAK34 Installation Manual preview
SAK34
Brand: Whelen Engineering Company Pages: 2
Rydeen BSS2 Owner'S Manual preview
BSS2
Brand: Rydeen Pages: 14
JBA 1528S Installation Instructions And Warranty Information preview
1528S
Brand: JBA Pages: 5
Toyota Tacoma 05 Brochure & Specs preview
Tacoma 05
Brand: Toyota Pages: 26

Brands by name

Popular brands

Load more brands