manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

How to Disengage the Automatic Locking
Mode

Unbuckle the combination lap and shoulder
belt and allow it to retract completely to
disengage the automatic locking mode and
turn on the vehicle sensitive (emergency)
locking mode.

How to Extract Seatbelts in the Rear
Outboard Positions

Seatbelts in the rear outboard positions can
lock if the seatback is returned firmly to its
upright position. You can unlock the
seatbelts using the following procedures.

For vehicles where the rear seats recline:

1. Recline the seat to its full rear recline

position.

2. The seatbelt should then unlock.

3. Return the seatback to its desired upright

position.

For vehicles with rear seats that do not
recline or are locked with the seat in its full
rear recline position:

1. Grasp the seatbelt webbing at the top of

the seatback.

2. Pull the seatbelt webbing forward, firmly.

3. After pulling the seatbelt forward, allow

the seatbelt to feed back into the seatbelt
retractor as much as possible. If
necessary, press the seatback down to
allow the seatbelt webbing to retract
further.

4. The seatbelt should then unlock.

5. If the seatbelt does not unlock, repeat

steps 1-3.

SEATBELT HEIGHT ADJUSTMENT

WARNING

Position the seatbelt height adjuster
so that the belt rests across the middle

of your shoulder. Failure to adjust the
seatbelt properly could reduce the
effectiveness of the seatbelt and increase
the risk of injury in a crash.

E146191

To adjust the shoulder belt height, squeeze
the button and slide the height adjuster up
or down. Release the button and pull down
on the height adjuster to make sure it is
locked in place.

SEATBELT WARNING LAMP AND
INDICATOR CHIME

This lamp illuminates and an
audible warning will sound if the
driver's safety belt has not been

fastened when the vehicle's ignition is turned
on.

35

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Seatbelts

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

ABL eMH1 WALLBOX Manual preview
eMH1 WALLBOX
Brand: ABL Pages: 176
ABL eMH1 WALLBOX Installation Manual preview
eMH1 WALLBOX
Brand: ABL Pages: 94
Saab B205 Installation Instructions Manual preview
B205
Brand: Saab Pages: 10
Hama 00178266 Operating Instruction preview
00178266
Brand: Hama Pages: 75
Globalsat MR-350P Installation Manual preview
MR-350P
Brand: Globalsat Pages: 2
tams elektronik 54-01016 Manual preview
54-01016
Brand: tams elektronik Pages: 44
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
Pontiac 2007 G6 Owner'S Manual preview
2007 G6
Brand: Pontiac Pages: 486
Ranger design 1525-PCX Installation Manual preview
1525-PCX
Brand: Ranger design Pages: 22
Mopar 2005-2009 Chrysler 300C Installation Instructions Manual preview
2005-2009 Chrysler 300C
Brand: Mopar Pages: 7
Nav TV MOST-HUR MB User Manual preview
MOST-HUR MB
Brand: Nav TV Pages: 6
TERAFLEX 1365000 Manual preview
1365000
Brand: TERAFLEX Pages: 18
Brodit 727203 Manual preview
727203
Brand: Brodit Pages: 2
AdvanceTec AT6538A Installation Manual preview
AT6538A
Brand: AdvanceTec Pages: 8
AdvanceTec Hands free User Manual preview
Hands free
Brand: AdvanceTec Pages: 12
AdvanceTec AT6701A User Manual preview
AT6701A
Brand: AdvanceTec Pages: 12
Spyder Auto PRO-YD-DR02 Series Installation Manual preview
PRO-YD-DR02 Series
Brand: Spyder Auto Pages: 3
Philips LDH0462/00 Information Sheet preview
LDH0462/00
Brand: Philips Pages: 3

Brands by name

Popular brands

Load more brands