Lincoln 2017 MKC Owner'S Manual Download Page 245 | Manualshive

Page: 245 / 538

background image

RV & Trailer Towing Guide Online

http://www.fleet.ford.com/towing-guides/

Website

TRAILER SWAY CONTROL

(If Equipped)

WARNING

Turning off trailer sway control
increases the risk of loss of vehicle

control, serious injury or death. Ford does
not recommend disabling this feature except
in situations where speed reduction may be
detrimental (such as hill climbing), the driver
has significant trailer towing experience, and
can control trailer sway and maintain safe
operation.

Note: This feature does not prevent trailer
sway, but reduces it when it begins.

Note: This feature cannot stop all trailers
from swaying.

Note: In some cases, if your vehicle speed
is too high, the system may turn on multiple
times, gradually reducing your vehicle speed.

The system applies the brakes to the
individual wheels and reduces engine torque
to aid vehicle stability. If the trailer begins
to sway, the stability control warning lamp
flashes and a message appears in the
information display. See Information
Messages (page 114). Slow your vehicle
down, pull safely to the side of the road and
check for correct load distribution.

You can switch this feature off in the
information display. When you switch the
ignition on, the system automatically turns
on.

RECOMMENDED TOWING
WEIGHTS

Note: Do not exceed the trailer weight
for your vehicle configuration listed in
the chart below.

Note: Be sure to take into consideration
trailer frontal area. Do not exceed 20
feet

2

(1.86 meters

2

) if your vehicle is not

equipped with a towing package or 30
feet

2

(2.79 meters

2

) if your vehicle is

equipped with a towing package.

Note: For high altitude operation,
reduce the gross combined weight by
2% per 1,000 ft (300 m) starting at the

1,000 ft (300 m) elevation point.

242

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Towing

«
...
243
244
245
246
247
...
»

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Brand: Quadratec Pages: 8

Brand: Ford Pages: 256

51 47 0 027 792

Brand: BMW Pages: 7

Brand: Ford Pages: 728

Brand: Westin Pages: 5

Brand: S3 Power Sports Pages: 2

2004 Impreza OUTBACK SPORT

Brand: Subaru Pages: 34

Crossland X 2017

Brand: Vauxhall Pages: 245

Brand: Edelbrock Pages: 1

Brand: Blue Ox Pages: 5

T13 Outback Frontal Protection System

Brand: T.J.M. Pages: 18

Brand: Audi Pages: 4

Brand: Audi Pages: 4

Brand: Thule Pages: 15

Brand: Rugged Ridge Pages: 3

Brand: Porsche Pages: 145

Brand: TracRac Pages: 6

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands