manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

POWER WINDOWS

WARNINGS

Do not leave children unattended in
your vehicle and do not let them play

with the power windows. They may seriously
injure themselves.

When closing the power windows, you
should verify they are free of

obstructions and make sure that children and
pets are not in the proximity of the window
openings.

E146043

Note: You may hear a pulsing noise when
just one of the windows is open. Lower the
opposite window slightly to reduce this
noise.

Press the switch to open the window.

Lift the switch to close the window.

One-Touch Down

Press the switch fully and release it. Press
again or lift it to stop the window.

One-Touch Up

Lift the switch fully and release it. Press or
lift it again to stop the window.

Bounce-Back

The window will stop automatically while
closing. It reverses some distance if there is
an obstacle in the way.

Overriding the Bounce-Back Feature

WARNING

When you override the bounce-back
feature the window will not reverse if

it detects an obstacle. Take care when
closing the windows to avoid personal injury
or damage to your vehicle.

Pull up the window switch and hold within a
few seconds of the window reaching the
bounce-back position. The window travels
up with no bounce-back protection. The
window stops if you release the switch
before the window closes fully.

93

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Windows and Mirrors

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
Victory 4x4 UNI-UPRS Install Instructions Manual preview
UNI-UPRS
Brand: Victory 4x4 Pages: 13
SuperATV AAB-P-RZR900-K2-001 Installation Instructions preview
AAB-P-RZR900-K2-001
Brand: SuperATV Pages: 3
Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
TEINHOF V-295 Fitting And Operation Manual preview
V-295
Brand: TEINHOF Pages: 2
ICON 91824E Installation Instructions preview
91824E
Brand: ICON Pages: 4
AL-KO AKS 1300 Operating Instructions Manual preview
AKS 1300
Brand: AL-KO Pages: 40
SpeedTech Lights STL Boss Quick Start Manual preview
STL Boss
Brand: SpeedTech Lights Pages: 2
SAAS MUSCLE Series Quick Start Manual preview
MUSCLE Series
Brand: SAAS Pages: 3
Nuna Pipa TW 2 Manual preview
Pipa TW 2
Brand: Nuna Pages: 29
Honda 2004 Civic Si Owner'S Manual preview
2004 Civic Si
Brand: Honda Pages: 219
Automotive Data Solutions BLADE-AL-TL5-EN Install Manual preview
BLADE-AL-TL5-EN
Brand: Automotive Data Solutions Pages: 27
Ford F-150 Hybrid 2021 Emergency Response Manual preview
F-150 Hybrid 2021
Brand: Ford Pages: 32
Jeep Cherokee 2009 Operating Information Manual preview
Cherokee 2009
Brand: Jeep Pages: 223
Masterack 022553KP Assembly/Installation Instructions preview
022553KP
Brand: Masterack Pages: 15
Honda 2014 Accord Sedan Reference Manual preview
2014 Accord Sedan
Brand: Honda Pages: 24
Honda 2013 Civic Sedan Owner'S Manual preview
2013 Civic Sedan
Brand: Honda Pages: 368

Brands by name

Popular brands

Load more brands