manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

The current assessment of your alertness is
within a typical range.

E131359

The current assessment of your alertness
indicates that you should rest as soon as
safely possible.

The status bar will travel from left to right as
the calculated alertness level decreases. As
the rest icon is approached the color turns
from green to yellow to red. The yellow
position indicates the first warning is active
and the red position indicates the second
warning is active.

Note: If you have recently received a
warning; you should consider resting, even
if the current assessment is within the typical
range.

Note: If the camera sensor cannot track the
road lane markings or if your vehicle speed
drops below approximately 40 mph
(64 km/h), the alertness level will change to
grey for a short time and the information
display will inform you that the system is
unavailable.

Resetting the System

You can reset the system by either:

•

Switching the ignition off and on.

•

Stopping the vehicle and then opening
and closing the driver’s door.

LANE KEEPING SYSTEM

 (If Equipped)

WARNING

The system is designed to aid the
driver. It is not intended to replace the

driver’s attention and judgment. The driver
is still responsible to drive with due care and
attention.

Note: The system works above 40 mph (64
km/h).

Note: The system works as long as the
camera can detect one lane marking.

Note: The system may not function if the
camera is blocked or there is damage to the
windshield.

Note: When Aid mode is on and the system
detects no steering activity for a short period,
the system will alert you to put your hands
on the steering wheel. The system may
detect a light grip or touch on the steering
wheel as hands off driving.

The system detects unintentional drifting
toward the outside of the lane and alerts or
aids you to stay in the lane through the
steering system and instrument cluster
display. The system automatically detects
and tracks the road lane markings using a
camera mounted behind the interior rear
view mirror.

Switching the System On and Off

Note: The system on or off setting is stored
until it is manually changed, unless a MyKey®
is detected. If the system detects a MyKey®,
it defaults to on and the mode is set to alert.

218

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Driving Aids

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Whispbar K678W Fitting Instructions Manual preview
K678W
Brand: Whispbar Pages: 14
Cadillac 2003 Seville Owner'S Manual preview
2003 Seville
Brand: Cadillac Pages: 402
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
AIS MAZMOD2 Manual preview
MAZMOD2
Brand: AIS Pages: 2
TOPPOINT LT95090 Quick Start Manual preview
LT95090
Brand: TOPPOINT Pages: 2
Buick 1997 Skylark Owner'S Manual preview
1997 Skylark
Brand: Buick Pages: 371
Brodit ProClip 854399 Installation Instructions preview
ProClip 854399
Brand: Brodit Pages: 2
Reimo TOUR EASY 4 936550 Quick Start Manual preview
TOUR EASY 4 936550
Brand: Reimo Pages: 4
Buick 1995 Roadmaster Manual preview
1995 Roadmaster
Brand: Buick Pages: 340
VP Autoparts 419420 Installation preview
419420
Brand: VP Autoparts Pages: 2
KAP HK CARPLAY 10w Instruction Manual preview
HK CARPLAY 10w
Brand: KAP Pages: 22
Honda 2002 Accord Coupe Owner'S Manual preview
2002 Accord Coupe
Brand: Honda Pages: 367
APS iArmor IA-S159 Installation Instructions preview
iArmor IA-S159
Brand: APS Pages: 4
Technaxx FMT1200BT User Manual preview
FMT1200BT
Brand: Technaxx Pages: 59
Audi Q7 V12 TDI QUATTRO - Brochure preview
Q7 V12 TDI QUATTRO -
Brand: Audi Pages: 20
Or-Fab 83228 Installation Instructions preview
83228
Brand: Or-Fab Pages: 5
Honda 2014 Accord Sedan Reference Manual preview
2014 Accord Sedan
Brand: Honda Pages: 24
Honda 2011 CR-V Owner'S Manual preview
2011 CR-V
Brand: Honda Pages: 673

Brands by name

Popular brands

Load more brands