manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

The front passenger sensing system is
designed to enable (may inflate) the front
passenger frontal airbag anytime the system
senses that a person of adult size is sitting
properly in the front passenger seat.

•

When the front passenger sensing
system enables the front passenger
frontal airbag (may inflate), the passenger
airbag status indicator will illuminate the
ON lamp and remain illuminated.

If a person of adult size is sitting in the front
passenger seat, but the airbag off indicator
lamp is lit, it is possible that the person is not
sitting properly in the seat. If this happens:
•

Turn the vehicle off and ask the person
to place the seatback in the full upright
position.

•

Have the person sit upright in the seat,
centered on the seat cushion, with the
person’s legs comfortably extended.

•

Restart the vehicle and have the person
remain in this position for about two
minutes. This will allow the system to
detect that person and enable the
passenger frontal airbag.

•

If the indicator OFF lamp remains lit even
after this, the person should be advised
to ride in the rear seat.

Passenger airbag

Passenger airbag status indicator

Occupant

Disabled

OFF: Lit

Empty

ON: Unlit

Disabled

OFF: Lit

Child

ON: Unlit

Enabled

OFF: Unlit

Adult

ON: Lit

45

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Supplementary Restraints System

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

iDataLink maestro Rr Install Manual preview
maestro Rr
Brand: iDataLink Pages: 106
ABL Wallbox eM4 Single Installation Manual preview
Wallbox eM4 Single
Brand: ABL Pages: 68
Quadratec Brute Strength 12057.0271 Installation Manual preview
Brute Strength 12057.0271
Brand: Quadratec Pages: 6
Subaru 2007 Impreza Brochure & Specs preview
2007 Impreza
Brand: Subaru Pages: 21
Gator HUDGPS1 Quick Start Manual preview
HUDGPS1
Brand: Gator Pages: 2
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
Velleman CARS4500 User Manual preview
CARS4500
Brand: Velleman Pages: 12
Subaru 1998 Forester Owner'S Manual preview
1998 Forester
Brand: Subaru Pages: 298
Thule Kit 1312 Instructions Manual preview
Kit 1312
Brand: Thule Pages: 8
ROADGEAR RGABM1 User Manual & Fitting Instructions preview
RGABM1
Brand: ROADGEAR Pages: 2
Toyota SEQUOIA 2010 Quick Reference Manual preview
SEQUOIA 2010
Brand: Toyota Pages: 36
Ford FLEX 2019 Quick Reference Manual preview
FLEX 2019
Brand: Ford Pages: 10
Fiat Panda 2015 Owner'S Handbook Manual preview
Panda 2015
Brand: Fiat Pages: 204
AEM 21-5011 Installation Manuallines preview
21-5011
Brand: AEM Pages: 5
CEMO DT-Mobil Easy 200 L Original Operating Instructions preview
DT-Mobil Easy 200 L
Brand: CEMO Pages: 80
Toyota 2004 CELICA Electric Troubleshooting Manual preview
2004 CELICA
Brand: Toyota Pages: 284
Guardsman G1510 Fitting Instruction preview
G1510
Brand: Guardsman Pages: 3
DV8 JK 4 Installation Manual preview
JK 4
Brand: DV8 Pages: 7

Brands by name

Popular brands

Load more brands