manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Menu Item

Enable this option to remove additional voice prompts and confirmations.

Advanced Mode

Enable this option to have the system confirm a contacts name with you before
making a call.

Phone Confirmation

Enable this option to have the system display a list of available voice commands
when the voice button is pressed.

Voice Command List

Valet Mode

Valet mode allows you to lock the system.
No information is accessible until the system
is unlocked with the correct PIN.

When you select valet mode a pop up
appears informing you that a four digit code
must be entered to enable and disable valet
mode. You can use any PIN you chose but
you must use the same PIN to disable valet
mode. The system asks you to input the
code.

Note: If the system is locked and you cannot
remember the PIN, please contact the
Customer Relationship Center.

For Lincoln
United States: 1-800-521-4140
Canada: 1-800-387-9333

To enable valet mode, enter your chosen
PIN. The system then asks to confirm your
PIN by reentering it. The system then locks.

To unlock the system, enter the same pin
number. The system reconnects to your
phone and all of your options are available
again.

SYNC™ 3 TROUBLESHOOTING

Your SYNC 3 system is easy to use.
However, should questions arise, please
refer to the tables below.

To check your cell phone's compatibility, visit
the Ford or Lincoln website.

Website

owner.lincoln.com
www.syncmyride.ca
www.syncmaroute.ca

451

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

SYNC™ 3

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Vauxhall INSIGNIA 2017 Owner'S Manual preview
INSIGNIA 2017
Brand: Vauxhall Pages: 323
Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
Kolpin Outdoors 25-1080 Assembly & Owners Manual preview
25-1080
Brand: Kolpin Outdoors Pages: 6
Schartec CR 4 Manual preview
CR 4
Brand: Schartec Pages: 2
Audi A4 2016 Quick Questions And Answers preview
A4 2016
Brand: Audi Pages: 9
Belkin WIC004 Setting Up preview
WIC004
Brand: Belkin Pages: 4
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
Abrams RE-47X Installation And Operation Manual preview
RE-47X
Brand: Abrams Pages: 12
Safe Fleet PRIME DESIGN HXR-269-E-UM3-80 Manual preview
PRIME DESIGN HXR-269-E-UM3-80
Brand: Safe Fleet Pages: 12
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
Huf HUF8432MS Technical Description And User Manual preview
HUF8432MS
Brand: Huf Pages: 6
Volvo M3602654 Installation Instructions Manual preview
M3602654
Brand: Volvo Pages: 10
Mitsubishi MOTORS OUTLANDER PHEV 2022 Manual preview
OUTLANDER PHEV 2022
Brand: Mitsubishi MOTORS Pages: 8
Scion 2013 iQ Warranty & Maintenance Manual preview
2013 iQ
Brand: Scion Pages: 58
Kia 2015 optima Quick Start Manual preview
2015 optima
Brand: Kia Pages: 5
Spracht Aura Mobile BT MCP-2014 Quick Start Manual preview
Aura Mobile BT MCP-2014
Brand: Spracht Pages: 2
T-Tech FIT417 Service Bulletin preview
FIT417
Brand: T-Tech Pages: 1

Brands by name

Popular brands

Load more brands