Lincoln 2017 MKC Owner'S Manual Download Page 92 | Manualshive

Page: 92 / 538

background image

HEADLAMP EXIT DELAY

After you switch the ignition off, you can
switch the headlamps on by pulling the
direction indicator lever toward you. You will
hear a short tone. The headlamps will switch
off automatically after three minutes with any
door open or 30 seconds after the last door
has been closed. You can cancel this feature
by pulling the direction indicator toward you
again or switching the ignition on.

DAYTIME RUNNING LAMPS

(If

Equipped)

WARNING

The daytime running lamps system
does not activate the rear lamps and

may not provide adequate lighting during
low visibility driving conditions. Also, the
autolamps switch position may not activate
the headlamps in all low visibility conditions,
such as daytime fog. Make sure the
headlamps are switched to auto or on, as
appropriate, during all low visibility
conditions. Failure to do so may result in a
crash.

Type 1 - Conventional (Non-
Configurable)

The daytime running lamps turn on when:
1. The ignition is switched to the on

position.

2. The transmission is not in park (P) for

vehicles with automatic transmissions or
the parking brake is released for vehicles
with manual transmissions.

3. The lighting control is in the off, parking

lamp or autolamps positions.

4. The headlamps are off.

Type 2 - Configurable

Switch the daytime running lamps on or off
using the information display controls. See
Information Displays (page 108).

The daytime running lamps turn on when:
1. They are switched on in the information

display. See Information Displays (page
108).

2. The ignition is switched to the on

position.

3. The transmission is not in park (P) for

vehicles with automatic transmissions or
the parking brake is released for vehicles
with manual transmissions.

4. The lighting control is in the autolamps

position.

5. The headlamps are off.

The other lighting control switch positions
do not activate the daytime running lamps,
and you can use them to temporarily override
autolamp control.

89

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Lighting

«
...
90
91
92
93
94
...
»

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Brand: Camcar Pages: 6

NPL-TV 7874 DIGITAL

Brand: Napoli Pages: 20

Brand: Gator Pages: 8

Brand: Van Guard Pages: 3

Brand: ULTIMATE SPEED Pages: 6

Brand: S3 Power Sports Pages: 2

2004 Impreza OUTBACK SPORT

Brand: Subaru Pages: 34

Brand: POOL-LINE Pages: 2

Brand: S&B Filters Pages: 4

Brand: Mazda Pages: 3

Brand: Seat Pages: 300

Brand: Mercedes-Benz Pages: 27

Brand: Ranger design Pages: 14

PerfectView CRT300

Brand: Waeco Pages: 200

Brand: Federal Signal Corporation Pages: 12

Brand: NavInc Pages: 5

Brand: OEM Audio Pages: 21

Brand: Volkswagen Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands