manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

Note: The doors will not autounlock if you
electronically lock your vehicle after you
switch the ignition off and before you open
the driver door.

Enabling or Disabling

You can enable or disable the autounlock
feature in the information display or an
authorized dealer can do it for you.  See
General Information (page 108).

Illuminated Entry

The interior lamps and select exterior lamps
will light when you unlock the doors with the
remote control.

The system turns off the lights if:
•

You start your vehicle.

•

You press the remote control lock button.

•

They are on for 25 seconds.

The lights will not turn off if:
•

You switch them on with the lamp
control.

•

Any door is open.

Illuminated Exit

The interior lamps and select exterior lamps
will light when all doors are closed and you
switch the ignition off.

The lamps turn off if all the doors remain
closed and either of the following occurs:
•

After 25 seconds elapse.

•

You lock your vehicle from the outside.

Battery Saver

If you leave the courtesy lamps or dome
lamps on and switch the ignition off, this
feature turns them off after some time.

Accessory Mode Battery Saver for
Intelligent Access Keys

If you leave your vehicle with the ignition on,
it will turn off 15 minutes after you close all
of the doors.

Welcome Lighting

This feature lights select exterior lighting as
you approach your vehicle. You must have
an intelligent access key with you. The
feature turns off when you open a door,
liftgate, or unlock your vehicle. Welcome
lighting remains on for 25 seconds or until
you start your vehicle.

The feature is active when:
•

The feature is configured on in the
information display.  See General
Information (page 108).

•

The ignition is off.

•

All doors and the liftgate are closed.

•

You lock your vehicle.

The feature is not active when:
•

Your vehicle detects the intelligent
access key is inside.

•

The intelligent access key is in close
range of the vehicle for more than two
minutes.

•

The anti-theft alarm triggers.

67

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Locks

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Back View RV-250 User Manual preview
RV-250
Brand: Back View Pages: 168
Jackco SHARP ALIGN User Manual preview
SHARP ALIGN
Brand: Jackco Pages: 11
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
VDO DLD Wide Range II Installation Instructions Manual preview
DLD Wide Range II
Brand: VDO Pages: 84
Wagan TravelCharge Companion GO-Plus User Manual preview
TravelCharge Companion GO-Plus
Brand: Wagan Pages: 3
AddSecure Asset Light Installation Manual preview
Asset Light
Brand: AddSecure Pages: 14
Volvo 1996 960 Quick Tips preview
1996 960
Brand: Volvo Pages: 10
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
Blue Ox BX2323 Installation Instructions Manual preview
BX2323
Brand: Blue Ox Pages: 9
Yakima LockNLoad LightenUp Manual preview
LockNLoad LightenUp
Brand: Yakima Pages: 13
Menabo FROZEN ALU Fitting Instructions preview
FROZEN ALU
Brand: Menabo Pages: 4
AA Products APX2501 BLK Instruction Manual preview
APX2501 BLK
Brand: AA Products Pages: 8
Octocam ECO VEDR Technical Manual preview
ECO VEDR
Brand: Octocam Pages: 35
N2MB Racing WOT Box Installation Instructions Manual preview
WOT Box
Brand: N2MB Racing Pages: 13
SEC 6/911 Mounting Instructions preview
6/911
Brand: SEC Pages: 2
Meyer EZ-Mount Classic Operation And Maintenance Manual preview
EZ-Mount Classic
Brand: Meyer Pages: 44
AL-KO 811721-1 Manual preview
811721-1
Brand: AL-KO Pages: 40
Jegs ECONOAID 1002 Quick Start Manual preview
ECONOAID 1002
Brand: Jegs Pages: 2

Brands by name

Popular brands

Load more brands