manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

GAWR (Gross Axle Weight Rating)

GAWR is the maximum allowable weight
that a single axle (front or rear) can carry.
These numbers are on the Safety
Compliance Certification label. The label
is located on the door hinge pillar,
door-latch post, or the door edge that
meets the door-latch post, next to the
driver seating position.

The total load on each axle must never
exceed its Gross Axle Weight Rating.

GVWR (Gross Vehicle Weight Rating)

GVWR is the maximum allowable weight
of the fully loaded vehicle. This includes
all options, equipment, passengers and
cargo. It appears on the Safety
Compliance Certification label. The label
is located on the door hinge pillar,
door-latch post, or the door edge that
meets the door-latch post, next to the
driver seating position.

The gross vehicle weight must never
exceed the Gross Vehicle Weight Rating.

Safety Compliance Certification Label
Example:

E198828

WARNING

Exceeding the Safety Compliance
Certification label vehicle weight

rating limits could result in substandard
vehicle handling or performance, engine,
transmission and/or structural damage,
serious damage to the vehicle, loss of
control and personal injury.

Maximum Loaded Trailer Weight

Maximum loaded trailer weight is the
highest possible weight of a fully loaded
trailer the vehicle can tow. Consult an
authorized dealer (or the RV and Trailer
Towing Guide available at an authorized
dealer) for more detailed information.

GCWR (Gross Combined Weight
Rating)

GCWR is the maximum allowable weight
of the vehicle and the loaded trailer,
including all cargo and passengers, that
the vehicle can handle without risking
damage. (Important: The towing
vehicle’s braking system is rated for
operation at Gross Vehicle Weight
Rating, not at Gross Combined Weight
Rating.) Separate functional brakes
should be used for safe control of towed
vehicles and for trailers where the Gross
Combined Weight of the towing vehicle
plus the trailer exceed the Gross Vehicle
Weight Rating of the towing vehicle.

238

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Load Carrying

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
REVCAMUK MON16AHD Instructions preview
MON16AHD
Brand: REVCAMUK Pages: 4
Honda 2004 S2000 Owner'S Manual preview
2004 S2000
Brand: Honda Pages: 208
ECS Electronics CR-066-BHU Manual preview
CR-066-BHU
Brand: ECS Electronics Pages: 16
hc-cargo 171850 Mounting And Operation Instructions preview
171850
Brand: hc-cargo Pages: 60
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
TOPPOINT LT95090 Quick Start Manual preview
LT95090
Brand: TOPPOINT Pages: 2
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
Cadillac 2001 Eldorado Owner'S Manual preview
2001 Eldorado
Brand: Cadillac Pages: 335
Ford transit connect 2012 User Manual preview
transit connect 2012
Brand: Ford Pages: 299
SMART EQ forfour 2018 Owner'S Manual preview
EQ forfour 2018
Brand: SMART Pages: 224
Ranger design 1525-NSX Quick Start Manual preview
1525-NSX
Brand: Ranger design Pages: 22
travall TDG1166 Fitting Instructions preview
TDG1166
Brand: travall Pages: 4
Van Guard VG162S Fitting Instructions preview
VG162S
Brand: Van Guard Pages: 3
Honda 2008 S2000 Manual preview
2008 S2000
Brand: Honda Pages: 280
Dodge 2009 RAM TRUCK Owner'S Manual preview
2009 RAM TRUCK
Brand: Dodge Pages: 543
iSimple DUALINK PGHGM2 Owner'S Manual preview
DUALINK PGHGM2
Brand: iSimple Pages: 16

Brands by name

Popular brands

Load more brands