Lincoln 2017 MKC Owner'S Manual Download Page 466

Page: 466 / 538

Voice command issues

Possible solution

Possible cause

Issue

Review the cell phone voice commands and the media voice
commands at the beginning of their respective sections.

You may be using the wrong voice
commands.

SYNC 3 does not under-
stand what I am saying.

Refer to the audio display during an active voice session to find a list
of voice commands there.

Wait for the system to prompt you before you state your command.

You may be speaking too soon or at the
wrong time.

Review the media voice commands at the beginning of the media
section.

You may be using the wrong voice
commands.

SYNC 3 does not under-
stand the name of a song
or artist.

Say the song or artist name exactly as it is displayed on your device.
For example, say "Play Artist Prince" or "Play song Purple Rain".

You may not be saying the name exactly
as it appears on your device.

Make sure you are saying the complete title such as "California remix
featuring Jennifer Nettles".

If there are any abbreviations in the name, like ESPN or CNN, you
have to spell those: "E-S-P-N" or "C-N-N".

Make sure that song titles, artists, album, and playlists names do not
have any special characters like *, - or +.

The song or artist name may have some
special characters that are not being
recognized by SYNC 3.

463

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

SYNC™ 3

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2017 MKC

Reviews:

Related manuals for 2017 MKC

Brands by name

Popular brands

Lincoln 2017 MKC, Owner'S Manual

Search results

Summary of Contents for 2017 MKC

Reviews:

Related manuals for 2017 MKC

Brands by name

Popular brands